What To Know About Installing ATV Passenger Seats
- Most ATV passenger seats are “universal fit”, so they fit almost all models of ATVs.
- You will need to have an already installed rack to secure the ATV rear seat.
- If you do plan on carrying a passenger, you will also want to install passenger foot pegs for passenger comfort and stability (not included with the seat).
- Most hard ATV storage box seats will require you to drill holes in the box in order to secure it to your rack.
- Hard ATV passenger seats use U-bolts fastened to the rack.
- Soft seats don’t require drilling and are secured with straps.
- Make sure your ATV is large enough to handle the additional weight.
- Carrying a passenger can interfere with center of gravity, balance and operation, so it is not recommended for aggressive riding.
- Youth operators should never carry minor aged passengers.
- A comfortable seat is always nice to have for camping, relaxing and long rides when you need a break.
Laws Regarding ATV Rear Seat Use
- Some states legally require ATVs to be specifically labeled by the manufacturer as safe/approved for passengers with a factory ready two seater ATV design.
- Most ATV seat manufacturers state “not for use when riding” for liability protection.
- You need to be aware of legality and safety issues prior to installation.
ATV Passenger Seats With Storage
1. QuadBoss Weekender Trunk
- Dimensions: 42” x 17” x 28”
- Weight: unknown
- WildATV Rating: 4 / Out of 5
Pros and Cons
- Pros
- Comfortable padded seat with backrest
- Universal fit
- Opens from rear
- Clever built in space for gas storage (2 gallons) or small cooler
- Good sized storage area
- Hand grips
- Bottom cushion is held in place with Velcro and easily removable
- Hard side construction
- Cons
- May need to drill your own mounting holes
- Not waterproof/dust-proof (this could be improved with some minor self modifications)
- Would be nice if it could accommodate 5 gallons of gas
- Strap closure (could stretch/weaken over time)
- Not lockable
2. Moose Trailblazer Storage Trunk
- Dimensions: 40″ x 26″ x 17-1/2″
- Weight: unknown
- WildATV Rating: 5 / Out of 5
Pros and Cons
- Pros
- Comfortable padded seat
- Rear brake light
- Reflectors
- Can be locked with key
- Excellent storage
- Universal fit
- Includes U-bolts for mounting
- Hand grips
- Hard side construction
- Cons
- May need to drill your own mounting holes
- You will need to splice your break lines to get the rear lights to work
- Small seat
3. Kimpex Outback Trunk Rear
- Dimensions: 42″ x 28″ x 17″
- Weight: 33.8 lbs
- WildATV Rating: 4.3 / Out of 5
Pros and Cons
- Pros
- Large comfortable padded seat
- Water tight construction
- Universal fit
- Includes mounting hardware
- Built in arm rests
- Hard side construction
- Each armrest is a separate storage compartment
- Behind the seat gas can storage
- Can hold up to 2.5 gallon gas can
- Cons
- You may need to drill your own mounting holes in the box
- Provided U bolts may not work for all models
- Does not fit all ATV helmets
- As with most of these ATV seats, some additional weather stripping will need to be added to minimize the dust
4. Rage Powersports Black Widow Lounger Storage Box
- Dimensions: 40 1/2” x 22 3/4” x 16 1/2”
- Weight: 26 lbs
- WildATV Rating: 4.8 / Out of 5
Pros and Cons
- Pros
- Comfortable padded seat
- Padded hand holds
- Hard side construction
- Built in arm rests
- Locking box with two keys
- Reflective decals
- Elastic straps secure the lid to keep it from rattling with riding
- Includes 4 U-bolts for installing
- Three compartments
- Cons
- May need to drill your own mounting holes
- One lid for three storage compartments (This could be a pro or con depends on your needs)
5. WES Classic Econo ATV Passenger Seat
- Dimensions: 43″ x 27″ x 16″
- Weight: 30.9 lbs
- WildATV Rating: 4.5/ Out of 5
Pros and Cons
- Pros
- Very comfortable padded seat
- Storage capacity of 17.6 gallons
- U bolts mounting kit
- Hard-sided construction
- Universal fit
- Rear reflector
- Key lock set
- Listed as able to hold 2 “regular” sized helmets
- Cons
- Depending on your setup, you may need to drill your own mounting holes
- Storage latches bend easily and could use an upgrade
- May not be large enough for most adult helmets
- Limited storage space
6. Kolpin ATV Rear Helmet Box
- Dimensions: 36.75″ x 27.88 x 17″
- Weight: 23.6 lbs
- WildATV Rating: 4.4/ Out of 5
Pros and Cons
- Pros
- Universal fit
- Easy installation with straps
- Weather resistant
- Soft sided storage
- 3 large zippered compartments
- 2 water bottle holders
- Packs down when not in use
- Extra large seating area
- Trusted brand
- Cons
- Water resistant not waterproof
- Not as durable as a hard sided seat
- Zippers could use some improvement
Soft Sided ATV Rear Seat Storage
7. Coleman ATV Rear Padded-Bottom Bag
- Dimensions: 12″ x 8.25″ x 8″
- Weight: 5.62 lbs
- WildATV Rating: 4.3/ Out of 5
Pros and Cons
- Pros
- Easy installation with straps
- Universal fit
- Folds down when not in use
- 3 Large storage compartments
- 2 Water bottle holders
- Trusted brand
- Cons
- Zippers could use some improvement
- Water resistant not waterproof
- Not as durable as a hard side ATV rear seat
8. Kolpin Matrix Seat Bag
- Dimensions: 32” x 22” x 11”
- Weight: unknown
- WildATV Rating: 4 / Out of 5
Pros and Cons
- Pros
- Universal fit
- No drilling needed
- Easy to attach with web reinforced buckles
- 2.02 cubic feet of storage
- Center section is a cooler that fits 12 pack with a bit of additional space
- Coated nylon construction
- Water bottle holder
- Exterior bungee cord for extra storage
- Side bags are detachable
- Cons
- Soft sided vs hard sided construction
- Zipper could use some improvement
- Water resistant not waterproof
- Not the most comfortable for passengers/long term seating
- Not Lockable
9. ATV Tek Kings Mountain Shadow ATV Cargo Bag
- Dimensions: unknown
- Weight: 18.55 lbs
- WildATV Rating: 4.5 / Out of 5
Pros and Cons
- Pros
- Universal fit
- No drilling needed
- Easy to attach with web reinforced buckles
- 1 inch overlapping seal to ensure a tight gap-free seal
- Removable padded seat and backrest
- Constructed from tarpaulin which is waterproof, fade and mold resistant
- 2 Removable front pockets and 2 expandable and removable drink holders
- Comes in black and camo
- Back compartment can fit a rifle or bow
- Side bags are detachable
- Cons
- Not lockable
- No arm rests or hand grips
- Not fully waterproof
- A bit of work to assemble
- Instructions not always included (but can be found online)
- The 2 removable pockets and 2 drink holders are poorly attached with Velcro and will require extra securing
10. Rhino RoadMate ATV Cargo Bag
- Dimensions: 18″ x 9″ x 10.2″ per bag (set includes 3 bags)
- Weight: 5.14 lbs
- WildATV Rating: 4.7 / Out of 5
Pros and Cons
- Pros
- Universal fit
- No drilling needed
- Includes 2 adjustable elastic cords and 1 pair of adjustable straps
- Easy to attach with 6 reinforced rubberized straps with super-safe cam buckles
- Removable padded seat and backrest
- Constructed of high-density, water-repellent, splash-, scratch- and dirtproof 900D fabric w/ tarpaulin
- Has carbon fiber frames inside for superior stability
- Reflective elements for increased visibility
- Double zipper
- Set includes 3 bags for flexible use
- Detachable padded seat 9″ x 17.4″ x .6″
- Cons
- Not lockable
- Not fully waterproof
- Seat could use more padding (but this is true with most of these seats)
- Great for storage, but not leaning
- The carbon fiber frame could break if you lean against it