HomeAccessoriesTop Rated ATV Table Lifts

Top Rated ATV Table Lifts

ATV Table Lifts

APlusLift Table Lift

Specs

  • Lift Weight Capacity: 1,500 lbs
  • Weight: 550 lbs
  • Table Measurements L x W: 110” x 48” (with extensions and ramp)
  • Lifting Height: 7” – 33”

Pros And Cons

  • Pros
  • 20” loading ramp
  • Extra wide (with side extensions)
  • Sides are easy to remove
  • Comes with a service jack
  • Strong build, stable
  • 8 safety locking heights for 19.5” – 30”
  • Rear service drop out panel
  • 24 month parts warranty
  • Cons
  • 20” loading ramp – not ideal for motorcycles
  • Some motorcycles may need a ramp to load/unload
  • Foot pedal needs improvement (goes up too fast initially, but improves after break in period)
  • Wheel clamping mechanism may need to be shimmed with washers for better fit
  • Metal is slick – could be improved with anti slip surface
  • The welds are sturdy, but not the best looking
  • Requires an air compressor with 90-110 psi
  • This ATV table lift has two wheels and a pull handle, but it is difficult to move due to its weight

APlusLift Table Lift


iDeal Pro-Series ATV Table Lift

Specs

  • Lift Weight Capacity: 2,200 lbs
  • Weight: 980 lbs
  • Table Measurements L x W: 88 3/5” x 50”
  • Lifting Height: 7″ – 47.25″

Pros And Cons

  • Pros
  • Can hold more weight
  • 6 height position locks
  • Rear service drop out panel
  • Hand held remote control with magnetic base
  • Non-slip diamond tread platform and ramps
  • Snazzy blue color
  • Innovative ramp design
  • 110V integrated electric/hydraulic power unit – no air compressor needed
  • Tie-down anchor eye bolts
  • Build in wheel stops
  • Strong build, stable
  • Extra long ramp 27 1/2″ (excellent for motorcycles)
  • Cons
  • More expensive than other designs
  • Motorcycle parts have to be purchased separately (M-Vise or M-Chock)
  • Very heavy
  • Nearly impossible to move
  • The blue color is pretty, but it may not appeal to all buyers

iDeal Pro-Series ATV Table Lift


Related: ATV Accessories


Black Widow ProLift

Specs

  • Lift Weight Capacity: 1,500 lbs
  • Weight: 447 lbs
  • Table Measurements L x W: 125.5” x 48” (with extensions and ramp)
  • Lifting Height: 7” – 31.25”

Pros And Cons

  • Pros
  • 20” loading ramp
  • Extra long table
  • Known brand name
  • Build in front wheel chock
  • Rear service drop out panel
  • Comes with a service jack
  • Strong build, stable
  • 8 safety locking heights
  • Ramp has non-slip grip surface
  • Cons
  • 20” loading ramp – not ideal for motorcycles
  • Some motorcycles may need a ramp to load/unload
  • No neutral on foot pedal
  • Requires an air compressor with 90-110 psi
  • Assembly instructions need improvement
  • It has two wheels and a pull handle, but it is difficult to move due to its weight

Black Widow ProLift With Center Jack

Read Next